How to transfer photos from Canon M50 to Computer in 6 steps?
The Canon EOS M50 is suitable for vlogging everywhere you go about your experiences and feelings. Advanced technology is not only limited to photography, but also to different ways of linking images and videos to other devices. Although the Canon EOS M50 is not available via WiFi, you can still transfer files using a data cable from your Canon M50 camera. You’re going to have big files, so make sure you use a 5-pin USB cable (Hey! It’s on Amazon). Before you get started with your camera, take a quick look at the steps you can take to make it easy to transfer files.
Want to keep things simple? Consider a 128 gb memory card for canon m50 with speed up to 170MB second.
6 Steps to transfer photos from Canon M50 to Computer
Step 1
Photo transfer from the Canon M50 to the computer
You will find a USB port that is covered with a cap on the side of it. Remove this cap carefully to reveal the USB port. Now, insert your camera’s data cable and insert the smaller end of the wire and the wider part of the wire into your personal computer. As you plug in the data cable, your computer will recognize the camera almost immediately and you will know this through the notification you get. If you want to transfer the files, you may have to download all the important drives and software that is necessary.
Step 2
Transfer from the eos m5 canon to the computer
Once the initial step is done, on your computer screen, you will find a message or notification that will allow you to find out what is happening on your camera device. This can be seen after installation in the upper right corner of the screen. You will find a variety of options when you click on this, which are functions that you can perform via the computer on the camera. Read all of them carefully and look for the option that says and clicks on transfer files.
Step 3
Transfer pictures from Canon M50 to PC-eos utility
The transfer file option will show you a list of options again, and you need to look for the “Open Device to View Files” option, and then click on it. This option will open up all the files in the file explorer that are present in the camera.
Step 4
Transfer photos to computer from Canon M50, DCIM
The file explorer allows you to view the files on the DSLR canon flip screen. Look for the DCIM folder that holds all the photos and videos, which is the mother folder.
Step 5
Transfer photos to computer from Canon M50-transfer photos
You can now select all the images and videos you clicked on from your vlogging camera from the folder to start transferring them to your computer. After the selection is finished, right-click any of the images to find a drop-down list, and then click the ‘Copy’ button. The copy option will save the clipboard with a copy of all the files you have selected.
Step 6
Transfer photos from Canon M50 to PC pairing configuration
You need to go to the hard drive of your computer in order to transfer files, including images and videos, to your computer. Wherever you wish to store and save your files, you must create a folder there. Except on a removable disk, you can’t create folders anywhere. Right-click anywhere on the screen once you have created this folder and click on the ‘paste’ option from the drop-down list that appears.
You will then find all the files and folders you have selected from the camera that are being transferred to the hard drive of your computer. Make sure that while the transfer is being made, your camera is turned on so that all files are transported safely to your computer.
