How to shoot landscape photography with Nikon D5300 ?
The Nikon D5300 has a 24.1MP DX CMOS camera, shooting images that beat most of its rivals with brilliant accuracy. To film a landscape scene, most individuals use the wide-angle lens of the renowned Nikon D5300 camera. But for beginners, if they are not used to taking such shots, it can be a challenging task. Landscapes are easier to shoot compared with other kinds of photography. Landscape photography requires a wide-angle lens as it requires a name.
The best available wide angle lens out there for the Nikon D5300 (Hey! It’s on Amazon) will be if you want to go pro Sigma 10-20mm f/3.5. If you don’t want to break the bank, depending on your budget, a cheaper Altura alternative is also available on Amazon.
Landscape Photography Settings for Nikon D5300
Step 1. Using the programmed auto mode
Select ‘Green’ or P mode to use the programmed auto mode. The P mode operation is a basic point-and-shoot operation. In mode P, for optimal exposure, the camera automatically changes the shutter priority and aperture. You can experiment with other combinations of aperture and shutter speed that will yield comparable exposure. In any case where you don’t want to go wrong, select programmed auto for landscape shots.
Step 2. Fixing the desired aperture
Switch the shooting mode to Aperture Priority (marked as A) to get the ideal landscape shot and set the f-number to f/16.
An aperture number of f/8 is suitable for an ideal landscape scenario. However, if a large portion of the frame is taken up by the scenery around you, then setting the aperture higher than f/8 is a good idea. A f/16 aperture allows photographers to put everything in focus in front of them. You can pick the aperture and let the camera set the shutter speed for maximum exposure automatically. To monitor background blur, you can alter the aperture.
Step 3. Accurately focusing on the scene
Move the dial to the manual position in the camera mode to get the perfect focus. Usually, the setting is labelled M or MF.
After that, you need to fix the camera by setting the Focus mode to MF for manual focusing. Look through the viewfinder, and until you see the screen blinking red, click the multi-selector.
The focal point selected during autofocusing tells the camera to focus on the scene.
Step 4. Setting the shutter speed
Speed of the Nikon d5300 landscape shutter
You can choose the shutter speed of your choice to allow the camera to change the aperture automatically for optimal exposure. In a landscape shot, such as a waterfall, it is used primarily to prioritize motion. To do that, the mode dial must be rotated to S. Rotate the command dial to pick the necessary shutter speed until the shutter priority is set. For faster speeds, you need to move right and for slower speeds left. If you shoot holding your camera, make sure you don’t slow the shutter speed too long. A camera shake is caused by a slow shutter speed.
