Kernel Mode Trap Error Windows 8.1

kernel mode trap error windows 8.1

Kernel Mode Trap Error Windows 8.1 – Here we can see “Unexpected Kernel Mode Trap Windows 10”

0x0000007F – Fix Windows

Find the solution to the 0x0000007F UNEXPECTED TRAP error message affecting Windows XP and Windows Vista. Windows 7, Windows 8, and Windows 8.1.

Concerning the “0x0000007F” error

Itechbrand has compiled the following information about this error, based on the knowledge gathered by our global network, engineers, developers, technicians, or partner organizations.

Description and Symptoms

These error messages, alerts, and warnings are all related to the current error.

Symptom 1: 0x0000007F error screen

The kernel-mode error can be triggered by two situations: the CPU created a condition that isn’t allowed to be caught by the kernel, or the condition is unrecoverable.

The most common cause is hardware failure, mostly thanks to faulty or mismatched memory. This error can also be caused by faulty software that is currently installed on your computer.

Also see: Whatsapp Error C101a006

Windows has been closed to prevent further damage because of a problem detected.
Send it to your computer.

This Stop error screen may be your first.
Restart your computer. These steps will help you if the screen comes back up.

Make sure that you have enough disk space. Drivers that are not adequately spaced will be reported.
Identified in the Stop message, disable driver or check
For driver updates, contact the manufacturer. Try changing video
Adapters

For BIOS updates, check with your hardware vendor. Disable
There are many BIOS memory options, such as shadowing or caching. You can contact us if you have any questions.
Safe Mode can be used to disable or remove components
computer press F8 to choose Advanced Startup Options.
Select Safe Mode

Technical information

*** STOP: (0x0000000000), 0x0000000000

Windows 8 computers have the error code replaced by UNEXPECTED _KERNEL_MODE_TRAP

(

Your computer has experienced a problem and must be restarted. We are just
We'll collect some error information and restart the service. (0%)
Complete)

You can find more information online by searching for the error: UNEXPECTED KEERNEL MODE TRAP

This Error: Causes

One or more of these factors can cause this error.

1. Faulty RAM module

This error could be caused by a RAM module fault that causes read/to write errors. It’s best to scan your system memory for the problem and then replace the RAM module.

Cause 2: Older or corrupt device drivers

Sometimes the device drivers may become misconfigured, corrupt, or outdated, which will also happen after a Windows update or a Windows downgrade from a more modern system to an older one.

Windows 0x0000007F Fix

Fix 1: Check new hardware

It is assumed that the error occurred after a recent hardware install.

Removing the damaged hardware is enough to fix the problem.

If you believe the error occurred after the installation of the new hardware’s driving power, please refer to Fix #3.

2. Test RAM

This error can often be caused by mismatched or faulty memory.

Also, see: Facebook Tests New QR Code Payments For US Users

If the error code 0x0000007F appears immediately after installing a new RAM, you should pack your computer up and remove it. Then restart your computer to verify that the error has been corrected.

You can check the Windows Memory Diagnostic Tool to see if faulty RAM is causing the error.

Follow these steps to do this:

  1. Click Start
  2. In the search box, type in Memory Diagnostics Tool
  3. Right-click on Memory Diagnostics Tools
  4. Choose Run as Administrator
  5. Follow these instructions to begin the diagnostic process.

If Windows Memory Diagnostic doesn’t return any results, you can also use the Easy Recovery Essentials Automatically Repair feature. This will inspect your RAM, HDD, and CPU in one process.

  1. Get Easy Recovery Essentials
  2. The ISO Image should be burned. Follow these instructions to create a bootable ISO image. You can also make a recovery USB if you prefer.
  3. Get into easy recovery essentials
  4. Choose Automated Repair
  5. Click Next and wait for the Automated Repair process’s end. Any issues that are found with your RAM or hard disk will be reported by the automated Repair process.

Fix 3: Update or disable drivers

To check if a faulty drive causes the error, run an automatic driver update or manually update the drivers to the newest available versions.

These steps will allow you to manually update your driver:

  1. Click Start
  2. In the search box, type devmgmt.MSc
  3. Select devmgmt in the results list
  4. Right-click the driving force
  5. Select Update Driver Software to update your driving force.
  6. Select Disable to disable the driving force.
  7. Select Uninstall to uninstall the driving power.

These steps will allow you to run an automatic driver upgrade

  1. Click Start
  2. Visit Devices and Printers
  3. Right-click your computer
  4. Select Device Installation Settings
  5. Select Yes to do it automatically
  6. Click on Save Changes
  7. To continue, follow the steps.

4: Disable memory caching in BIOS

These steps will allow you to open your BIOS Menu and disable Cache Memory. You can then check if 0x0000007F is appearing.

  1. Restart your computer
  2. Enter BIOS Setup by pressing F2 or Del Key
  3. Navigate to the Advanced menu
  4. Select Cache Memory
  5. It must be disabled
  6. To save lots of money and exit quickly, press F10.
  7. Select Yes

Applicable Systems

This knowledgebase article on Windows applies to the following operating systems:

  • Windows XP (all editions).
  • Windows Vista (all editions).
  • Windows 7 (all editions).
  • Windows 8 (all editions).
  • Windows 8.1 (all editions).
  • Windows 10 (all editions).
Melina Richardson is a Cyber Security Enthusiast, Security Blogger, Technical Editor, Certified Ethical Hacker, Author at Cybers Guards & w-se. Previously, he worked as a security news reporter.