Hygiene is a civilised human being’s greatest habit, and in the case of your machine, it’s the best accessory and constructive preventive for unforeseen and miserable events like this endless loop. Just as proper hygiene keeps bugs at bay, from microscopic to the dreadful and opportunistic insects that appear on the skin in the absence of a good massage with water and soap, so does proper computer maintenance keep electronic bugs at bay, events like the automatic restart, whose harmful side effects, if not prevented or stopped, can cause serio.
If you keep your PC dust-free, dust will collect within it over time. Otherwise, the annoyance of an automatic restart would eventually occur. When you realise that dust causes electronic components to lose touch and not be recognised by the device, and the system not detecting them triggers the problem, the automatic restart loop begins, the mystery will be solved.
To stop the loop, you’ll need to clean every electronic component thoroughly, paying particular attention to the RAM sticks. Here’s how to go about it:
- Switch off your computer.
- Remove the plug from the wall socket.
- Make sure there is no power left in your computer by pressing the power button.
- Put on an anti-static wristband (you can also rub your hands on a metal surface to remove the statics on your hands which may seriously damage your PC components)
- Apply the cleaning kit, which includes screwdrivers, compressed air can, and cleaning cloth.
- Examine your RAM sticks for dark residues, then clean them with a quick eraser and rubbing motions.
This is the first thing you can do if you know your machine hasn’t been properly maintained, so start dusting it!
Second Level: No Software Maintenance and a Simple Solution
While it is excellent that you take sophisticated preventive action when going online using a Trustworthy VPN, particularly because you know for a fact that a number of them are the best VPNs for Windows, it is highly recommended that you first focus on the problem-signs of your OS’s lack of maintenance, blinking eyes before your sight.
The simplest solution, which works in the majority of cases, is to boot into safe mode and run the device backup you were advised to make when you purchased your computer. This backup function is really powerful in Windows 10, it’s called “Windows Recovery Drive” and it fixes completely all issues with a corrupted OS, returning your PC’s OS to its original safe and virginal state, that is, before you went online for the first time.
When you return from your online adventure, you can encounter software issues such as corrupted system files, broken system drivers, damaged registry settings, incorrect computer partition or OS partition value, and other issues, with the common cause being a lack of software maintenance. Regardless, the “Windows Recivery Drive” feature should be your first port of call for resolving these issues.
Repairing the Registry Editor is a separate but very successful approach. Everything you have to do now is:
- Start the computer from the recovery disc.
- Go to the Advanced tab.
- Select ”Command Prompt” from the drop-down menu.
- Enter Regedit in the search box.
- Find Setup.exe and double-click on the right panel you see in the Registry Editor: Computer/HKEY LOCAL MACHINE/SYSTEM/Setup/Status/ChildCompletion
- Change the value of the field ”Value Data” to 3 and click “Ok.”
- Close the Registry Editor and type Prompt into the command prompt.
- Finally, on the error message, press “OK” to restart the device.
Third Level: Heavy Malfunctions and Simple Solutions
Some common persistent loop scenarios are presented here, along with simple solutions.
- The most straightforward approach is to perform a hard reboot. Simply press and hold the machine’s power button for 3-5 seconds before the computer shuts down. Wait 10 seconds (most people never wait, which is incorrect) and then restart the machine to see if the roboot loop has disappeared.
- But you tried to speed up your computer? The bad news is that you messed up your BIOS, but don’t worry; all you have to do now is reset it. Remove the CMOS battery and wait 8-10 minutes before replacing it and turning on your computer to see if it has been repaired.
- Is it too hot in here? When the GPU reaches its maximum temperature, the loop is triggered. Simply turn off your machine and wait 15 minutes for it to cool down. Track CPU and GPU temperatures with the MSI AFTERBURNER.
- Connectors on the system panel: these connectors can be loose.
- Is it possible that this issue arose as a result of an update? Then it began when Cumulative Update (KB3081424) failed to complete the update, resulting in registry corruption in Windows 10. In this scenario, you have the following options:
- Check for updates by going to Start > Settings > Update & Security > Windows Update >Check for Updates. The reboot problem could be resolved with an additional patch.
- Take your Windows 10 CD and restart your computer from it. After that, you should:
- Select the “Repair” option in the lower left corner.
- Now choose Troubleshoot from the drop-down menu.
- Enter the following commands in the same order: Advanced Options>Command Prompt ▪ Bootrec /fixmbr ▪ Bootrec /fixboot ▪ Bootrec /scanos ▪ Bootrec /rebuildbcd
Keep in touch for potential maintenance and solution guidance, and remember to strike a balance between the physical and virtual, hardware and software. Adequate maintenance takes care of all components, and the building is often a preventative measure.