Feature Update To Windows 10 Version 1903 Error 0xc1900130 – Here we can see “feature update to windows 10, version 1903 – error 0xc1900130”
How to Solve the Windows Update Error 0xc1900130?
When a user attempts to update a pending Windows Update component using the automated WU component, the Windows Update Error Code 0xc1900130 is displayed. This error code indicates that the network connection between the client and the Windows Update server has been broken.
What’s causing the Windows Update Error Code 0xc1900130?
- Interference from 3rd parties is possible that an overprotective firewall or AV suite can freeze the connections between the client and the Windows Update server. This error code is often attributed to AVG. This scenario should be considered if you can resolve the problem by either disabling real-time protection or completely uninstalling third-party suites.
- The conflict between Intel RST Driver & Windows 10– One driver (pastoral. sys), is often reported as blocking communication with the update server. This Intel RST file can cause conflicts with older Windows 10 builds, especially with build 1900 or older. This will resolve the problem by renaming the store.sys driver. Your Windows installation will then ignore it.
- Corrupted WU component: This error code can also be caused by a glitch or corrupted dependency, which may cause the update process to fail. This scenario should be avoided. You can either use the AutomatedWU agent to reset the relevant components or manually using an elevated CMD prompt.
- Different 3rd party conflict: A recent system change may have caused an application or driver to become incompatible with the update component. You should use the System Restore feature to restore your system to the state it was in before the problem occurred.
Also, see: How to unfollow Facebook pages
Method 1: Preventing the 3rd party interference (if applicable)
AVG is the most common culprit for this error code. We received tons of reports from users claiming that AVG had blocked the update from installing.
Note: Other AV suites from third parties could also be causing an identical behavior.
Users affected by the problem reported that they were finally able to install the update without the 0xc1900130 error. This was only after disabling the real-time protection. Other users confirmed that the problem did not disappear after they uninstalled the safety suite.
If you believe that a third-party suite is responsible for the issue, you should first disable the real-time protection to see if it persists. Most security suites can be disengaged directly from the taskbar menu.
After you have completed this, restart your computer to check if the problem persists. __S.29__
If you still get the error 0xc1900130, uninstall the safety suite and delete any files that may be causing this behavior. This text will provide step-by-step instructions to remove your 3rd-party security suite and any files that may still be causing this behavior.
If this method wasn’t applicable, you followed it to no success, moving right down to the next potential fix down below.
Method 2: Renaming the pastoral.sys driver
It seems that the most common reason this problem occurs is a software incompatibility between Microsoft Windows and Intel. A problem with the driver pastoral. sys could cause you to block the Windows Update component for Windows 10 computers that use Intel RST drivers.
If this scenario is applicable, you ought to be ready to fix the matter by accessing the situation of the conflicting driver pastoral. Sys and renaming it with the ‘.old ‘extension to force your OS to disregard it.
Several affected users have confirmed that they were finally ready to install every pending update without issues after doing this and restarting their computer.
Here’s a quick guide doing this:
1. Start File Explorer. Go to View to verify extensions are visible. Enable it immediately if it isn’t already.
2. Navigate to the next location
C:\Windows\System32\drivers
3. Once you have reached the destination, scroll down the list of drivers to locate iastora. sys.
4. Once you have located the correct driver, right-click on it and select Rename from the context menu.
5. To force Windows to ignore it, rename the store.sys file to store. sys. old
6. Click Yes on the UAC (User Account Control) to allow admin access.
7. Start your computer again and wait for the next startup to complete.
8. After the boot sequence is completed, you can install Windows Update again to see if the problem is solved.
If you’re still encountering an equivalent Error Code 0xc1900130 when trying to put in the update, move right down to the following method below.
Method 3: Resetting the Windows Update component
This issue can also be caused by a corrupted dependency or glitch that causes the update process to stop working. This problem is more prevalent on Windows 8.1 but can also occur on Windows 10.
This scenario may apply to you. You should be prepared to resolve the problem by resetting all WU components that were involved in the update process. There are two options:
- Resetting WU via Automated WU agent
- Resetting WU manually via elevated CMD window
We’ve explained both methods below, so be happy to follow whichever guide you are feeling easier with:
Resetting WU Via Automated WU agent
- Visit this official Microsoft Technet page (here) and click on the Download button to download the Reset Windows Update Agent script.
- Once the archive is downloaded, use a utility like WinRar, WinZip, or 7Zip to extract its contents.
- Next, double-click on the ResetWUENG.exe file, click Yes at the UAC (User Account Prompt) to grant administrative privileges.
- Follow the prompts on the screen to run the script. After the operation is completed, restart your computer to see if the update is installed.
Resetting Windows Update manually via elevated CMD window
1. To open a Run dialog box, press Windows key + R. Next, type “cmd” and hit Ctrl + Shift+ Enter to open an elevated CMD Prompt. Click Yes to grant administrative privileges once you have seen the UAC (User Account Control).
2. To stop all Windows Update services, enter the following commands once you have reached the elevated CMD prompt. Press Enter after each command.
net stop wuauserv net stop cryptSvc Net stop bits net stop msiserver
Please take care to understand what we are doing. These commands temporarily stop Windows Update Services, MSI Installation, Cryptographic Services, and BITS Services.
3. Once all relevant services are frozen, run the subsequent commands to clear the two folders that are getting used by the WU component (SoftwareDistribution and Catroot2):
ren C:\Windows\SoftwareDistribution SoftwareDistribution.old ren C:\Windows\System32\catroot2 Catroot2.old
4. After removing the folders, you can run the following commands. Once done, press Enter to enable the previously disabled Windows services again.
net start wuauserv net start cryptSvc net Start Bits net start msiserver
5. Try restarting your computer again to see if the problem is solved at the next computer startup.
If you’re still encountering an equivalent 0xc1900130 error while trying to put in a pending update, move right down to the next potential fix below.
Also, see: 500 internal error youtube
Method 4: Using system restore
If the Windows updating component only started breaking recently after a driver or 3rd party app installation, likely, whatever you put in is currently interfering together with your OS ability to put in new pending updates.
Several users affected reported that pastoral. sys, a loaded driver, was preventing them from installing the latest updates. This scenario should be considered. System Restore can be used to restore your computer to a state that it was in before the conflict occurred.
Keep in mind that all Windows versions (Windows 7, Windows 8.1, and Windows 10) by default save many new restore snapshots frequently (at important system events). You should have several restore snapshots unless you change this default behavior.
Note: Be aware that any changes made after the snapshot was created are lost when you mount the snapshot using the System Restore utility. You can also revert any system changes, applications, or games made at that time.
If you are ready to travel this step and you understand the results, start following the instructions below to use the System Restore utility:
- Open up a Run dialogue box by pressing Windows key + R. After you manage to urge inside, type ‘rstrui’ and press Enter to open up the System Restore menu.
- Next, once you’re at the initial System Restore screen, click Next to advance from the primary menu.
- When you arrive at the next screen, check the box that says Show more restore points. Next, compare the dates of each saved restore point. Choose the one that is older than the apparition.
- The point will be selected once the right System has been restored. To go to the next menu, click on Next.
- Once you have reached this point, the utility will be ready to go. To begin the restoring process, click on Finish.
- The following machine states will be used to enforce the old system settings during startup. After the booting process is completed, you can install the previous failing update with WU and check if it fixes the problem.
If you’re still encountering an equivalent Windows Update 0xc1900130 Error Code, move right down to the next potential fix below.
User Questions:
1. Error: 0.xc1900130
When I try to update Windows 10, I keep getting the error 0xc1900130 What can I do to fix this problem?
2. 2.
Since Windows 10 version 1903 was released, I have been experiencing problems for the past few days. I downloaded the update and received a message saying that it wouldn’t work as I wanted to update. Intel Rapid Storage Technology (Intel RST). After updating Intel RST. The update sent me an identical message. I downloaded the recommended version Intel RST. I received the same message. Finally, I removed both Intel Ready Mode Technology and Intel RST. Next, I tried to update windows 10, but the same error occurred.
3. Windows 10 Feature update, version 1903 not installed
I received a notification from Microsoft telling me to update Windows. After restarting my system I noticed that the notification had asked me to install the updates again. Continue this process for three days, trying as hard as possible to troubleshoot the problem. The update is still not clear to me.
The Update Assistant, Media Creation Tool, and the standard update method have all failed to work. To stop the update services from running, I tried DISM.exe and renamed the SoftwareDistribution/catroot2 files. Multiple disk checks were performed with SFC/scannow and chkdsk. None of them produced any results. I have disabled all VPNs because I’ve seen some things that may make an impression.
Also, check out: Samsung Galaxy S21 FE presented in vibrant new renders
4. 4.
I have tried repeatedly to do the 1804 feature update and obtain “Error code 0xc1900130”.
