Element TVs that are not functioning properly can be frustrating. Element TV has many features and can display videos and photos in high resolution.
You need to quickly find a solution to a problem so you can watch your favorite shows again. Before you can repair an Element TV, it is important to identify the root cause.
Element TV can have many problems. You might see a picture, but no sound, the remote controller fails to work or the signal is lost after you power up the TV.
You should perform some tests before you contact Element TV support. Here are some examples of problems you might encounter with your device, and how to fix them.
Table of Contents
How to reset Element TV with no remote
These steps will allow you to perform a hard reset on your Element TV.
Unplug your TV from the AC mains wall socket. Give it a few minutes. Reconnect the power cord.
After you are done, turn off the TV and then press the power button to watch more content.
Troubleshooting Element TV won’t turn on
These steps will help you troubleshoot your Element TV if it is not turning on.
Verify that the TV has enough power. To ensure that they are tight, make sure you check the connections to the AC socket of your TV. Make sure you have connected the power cords securely to the back of your TV. Your TV may be on standby mode if you don’t see the LED lit up white. Press the Power or Standby buttons on the remote when in standby mode.
If the above does not work, consider contacting support services for further assistance.
Some Element TV models include a power switch at the device’s side. When you turn it on with a remote, make sure it is set to ON.
Troubleshoot Element TV does not show a picture
There are many ways to troubleshoot problems with your Element TV’s picture quality:
1. Blue screen
If the screen is blue, either your TV is not receiving any signal or you have chosen an incorrect source. To resolve the problem, press the SOURCE button on the remote. This will select the correct input.
Resetting all your connections is another option.
Unplug the power cord from the wall outlet and TV. Unplug your HDMI cable from your TV and media player. Connect them again.
These steps will reset your connections and resolve the problem.
2. Noisy, snowy, ghosting picture (TV)
This problem can occur if your antenna signal is weak. Adjust the position of an indoor antenna. Make sure to check the connections of your antennas to make sure they are tight.
3. After turning on the TV, pictures appear slowly
If the image appears slow after powering on the device, this is a sign that the booting process has muted it. This is usually not a cause for concern.
If the image does not appear within five minutes, you can contact a service provider.
The remote control for the Element TV is not working
Troubleshoot your remote if it isn’t working as you see below:
Clear any obstructions between the TV and remote control. Verify that you have the correct polarity installed on the batteries You can check if your batteries are sufficient to power, or you could consider replacing them. You must ensure that you have the right remote operating mode. Verify that the TV is plugged into the wall outlet.
Resetting the remote is another option. First, remove and re-insert the batteries. Next, hold down the power button for approximately 30 seconds.
Solutions for Element TV audio issues
Element TV audio problems can take many forms. These include:
Mute sound: This issue can be corrected by switching the remote’s sound Mute off. Volume: Make sure you are not setting the volume to zero. A picture without sound: Make sure you check all cables before connecting them to your TV or external AV source. After that, verify that the audio output matches the video input.
If the broadcast is not working, you can try another channel.
Fix: Element TV Advanced Settings Greyed Out
You cannot access advanced settings if your Element TV is greyed out. Here’s what you can do.
1. 1. Change the source mode
You can change the source mode if you’re using the wrong one.
Use your remote to press SOURCE. You can use the arrow buttons for access to the different input sources (TV/AV/COMPONENT/ HDMI/VGA/USB). To confirm, highlight the input source you wish to use and hit OK.
You can access the advanced settings while using a different input source.
2. Factory reset your device
This will wipe all of your settings and preferences.
Press the Menu button on your remote. Go to TV Settings. Select General Select Restore default.
Allow your TV’s
factory settings to be restored.
You can also go to the Lock menu, and enter the default passcode of either 0000 or 8899 on some devices. After that, you can access Advanced Settings.
Troubleshoot Element TV shows no signal
These methods can be used to troubleshoot signal issues:
Verify that the signal cable is connected. Make sure the signal cable is secure. You can adjust the resolution, horizontal frequency, or vertical frequency to correct the signal if it is not within your range. Check your antenna connections.
If you have an indoor antenna, it is worth adjusting its position. You will not receive any signal if your TV is plugged into the wrong input. If this happens, unplug all cables (including the HDMI cable) and then reconnect them properly.
Solutions for Element TV screen problems
Element TV screen problems can come in different forms. You may notice a
black square at the center of your TV screen. It can be fixed by turning off the closed caption. Use your remote to press the Menu button. Modify the Mode settings to TEXT or OFF.
You may also experience a black screen. It could be that you have set your device to an input it isn’t using. To fix the problem, you will need to select the correct input source.
First, make sure you identify the problem before you attempt to fix your Element TV. If you get a blue screen on your Element TV, reset all of your cable connections.
Reboot them and unplug them from the respective sources. For further assistance, contact customer support if you are still having trouble with your device.