The Canon m50 is the most powerful camera for creating excellent images. It is filled with several features and is relatively cheaper on the market than many other versions. Some of the features you will be able to find in Canon m50 are a touch screen that can be flipped out, high bitrate and simple codec, focus peaking, personalized buttons, magnifying and scanning using Dpad. So, if you are up for an awesome video shoot, while playing with a few of the Canon m50 video settings, you can get it through very perfectly.
5 Steps to Adjust Canon M50 Video Settings
Step 1. Getting started with initial settings
Canon M50 Video Setup, initial settings
All the settings are the first step in changing the Canon m50 video settings. Initially, it won’t be visible to you. This is because the beginner’s settings are set as ‘ON’ on Canon m50 by default. You need to pick a menu and then press the Display settings button. After that, in order to turn on the DSLR classic Canon Menu, you have to choose the menu display option and choose the standard.
Step 2. Adjusting the Shutter Button
Canon M50 Video Settings-Shutter Button change
You must use the button for the shutter and use it as a recording button. The whole process is made simple by setting the shutter button to the recording button when you shoot in video mode. This helps prevent the tiny record button that is in-built, which can be troublesome. You must go to the menu and turn on the camera in order to turn the shutter button into the record button. Select ‘5’ and pick the Btn function. To start and stop recording the video, the shutter button must be completely pressed..
Step 3. Controlling the Aperture
Video Settings for Canon M50-aperture
You need to have power over the aperture for a video to be shot effectively. By controlling the front dial, you can do so. Usually, the front dial lets you monitor the speed of the shutter when using the video mode. But instead, you can alter it to control the aperture. To toggle between the front dial controls, you need to click the Dpad or Exposure button. Make sure you first turn the video mode on. This will allow you to record 4k resolution videos.
Step 4. Enabling focus peaking
Video settings for Canon M50-enable concentration peaking
Even though the Canon m50 screen is crisp and even shows the minute details, for canon m50 video settings you can change it a little bit. To use Concentration Peaking, you need to click on the menu option. You have to pick the camera option after that. After that, click on the ‘5’ option and choose the settings for MF. You have the choice of selecting between high and low peak levels. You may also decide to select the colour choices from red, blue and yellow.
Step 5. Stabilization and IS settings
Canon M50 Video Settings – stabilization and IS settings
The Canon m50 has an in-built stabilizer. The stabiliser is entirely electrical. This means that it will not move the sensor. Your video will be slightly cropped instead. To change your Canon M50 video settings, you can turn this feature on and off. Whether you need to turn it on or off depends on your tripod. You first need to open the menu once you want to turn the built-in stabilizer off. From there, choose the camera option and then choose ‘5’. For IS settings, you will be able to see an option. Click on the digital IS option and disable it. Although when enable mode is on, the IS only cultivates a small portion of video, it crops out a significant portion in enhanced mode. In order to avoid the video from deteriorating, you have to keep it in mind.
You just have to follow these steps mentioned above and you can easily capture a good 4k resolution video. If you want to experiment with filmmaking, this is a golden opportunity for you.
